top of page

Troubleshooting Common Gimbal Problems with DJI Mini 2

Updated: Aug 27, 2023

Gimbals have revolutionized the world of videography and photography by providing smooth and stabilized footage, even in the most challenging situations. The DJI Mini 2, known for its compact size and impressive features, comes equipped with a built-in 3-axis gimbal that ensures your aerial shots are steady and professional-looking. However, like any piece of technology, gimbals can encounter issues from time to time.

In this guide, we'll delve into some of the most common gimbal problems faced by DJI Mini 2 users and explore effective troubleshooting steps to resolve them.

1. Gimbal Initialization Errors

One of the most prevalent issues users encounter is gimbal initialization errors. When you power on your DJI Mini 2, the gimbal is supposed to calibrate and level itself. If this process fails, you might experience jerky movements, abnormal sounds, or the gimbal remaining at an odd angle.

Troubleshooting Steps:

a. Check for Obstructions: Inspect the gimbal and its surroundings for any physical obstructions. Even a small piece of debris can disrupt the calibration process.

b. Calibrate the Gimbal Manually: In the DJI Fly app, navigate to the settings and find the option to calibrate the gimbal. Follow the on-screen instructions to manually calibrate the gimbal's pitch, roll, and yaw.

c. Ensure Level Surface: Place your Mini 2 on a flat and level surface before turning it on. This ensures that the gimbal's initial calibration has accurate reference points.

2. Gimbal Drift or Tilt Issues

Gimbal drift or tilt occurs when the gimbal isn't maintaining its intended position, leading to skewed or slanted footage.

Troubleshooting Steps:

a. Gimbal Auto Calibration: Use the DJI Fly app to perform an auto calibration of the gimbal. This might help the gimbal regain its proper level.

b. Manual Gimbal Calibration: If the auto-calibration doesn't resolve the issue, try manually calibrating the gimbal as mentioned earlier. This can often correct minor drift or tilt problems.

c. Check for Damaged Parts: Inspect the gimbal and its motorized components for any signs of damage. Sometimes, mechanical issues can lead to gimbal misalignment.

3. Motor Overload Warnings

Your DJI Mini 2's gimbal system is designed to detect motor overloads, which can occur when the gimbal encounters resistance beyond its capabilities. This might lead to warnings indicating motor overload.

Troubleshooting Steps:

a. Balance the Payload: If you've attached accessories to your Mini 2, ensure that the additional weight is well-balanced. Imbalanced payloads can strain the gimbal motors.

b. Avoid Sudden Movements: Rapid and abrupt movements can trigger motor overload warnings. Try to maintain smooth and controlled drone movements.

c. Update Firmware: Keeping your Mini 2's firmware up to date can resolve potential software-related issues that might trigger motor overload warnings.

4. Gimbal Motor Noise

Unusual noises coming from the gimbal motors can be unsettling. While some noise is normal, excessive or grinding noises can indicate a problem.

Troubleshooting Steps:

a. Clean and Lubricate: Dust or debris might accumulate within the gimbal assembly, leading to noise. Gently clean the gimbal area and use appropriate lubricants if recommended by the manufacturer.

b. Professional Inspection: If the noise persists and seems abnormal, consider reaching out to DJI's customer support or a professional technician for a thorough inspection.

5. Gimbal Not Stabilizing Properly

The primary purpose of a gimbal is to stabilize the camera, ensuring smooth footage even during drone movements. If your gimbal isn't stabilizing as it should, your videos and photos might appear shaky.

Troubleshooting Steps:

a. Check Gimbal Modes: Ensure that you have the gimbal set to the appropriate stabilization mode. The DJI Mini 2 offers different modes optimized for different scenarios.

b. Reset Gimbal Settings: Within the DJI Fly app, explore the gimbal settings and consider resetting them to default. This can often rectify configuration-related issues.

c. Recalibrate IMU: Inertial Measurement Unit (IMU) calibration can impact the gimbal's performance. Follow the instructions in the app to recalibrate the IMU.

6. Software Glitches Affecting Gimbal Control

At times, software glitches or app-related issues can impact how you control and operate your gimbal.

Troubleshooting Steps:

a. Restart the App: Close the DJI Fly app and relaunch it. Sometimes, a simple restart can resolve software hiccups.

b. Update the App: Ensure that you are using the latest version of the DJI Fly app. Updates often include bug fixes and improved compatibility.

c. Restart the Drone: If the app restart doesn't help, power off the Mini 2 and then power it back on.


The DJI Mini 2's gimbal is a remarkable piece of engineering that empowers drone enthusiasts and content creators to capture stunning footage. However, encountering gimbal problems is not uncommon, and they can range from minor calibration issues to more complex mechanical problems. By following the troubleshooting steps outlined in this guide, you can often resolve these problems and get back to enjoying the seamless, stabilized footage that the DJI Mini 2 is known for.

Remember that if the issues persist, seeking professional assistance from DJI's customer support or authorized service centers is always a good option to ensure the longevity of your equipment. Happy flying and shooting!

126 views0 comments

Recent Posts

See All


Avaliado com 0 de 5 estrelas.
Ainda sem avaliações

Adicione uma avaliação
bottom of page